Google’s Pixel 2 and Pixel 2 XL smartphones won rave reviews at the end of 2017, especially for their superb software and capable cameras but one standout feature that they lacked was wireless charging.
It’s a feature that the Pixel 2 series’ successors, the
Pixel 3 and
3 XL, along with 2019’s
Pixel 4 and
4 XL, all embraced.
Although not as mainstream as manufacturers would like, wireless charging is transformative; once you’re used to it, going without seems like a real step backwards. Nowadays you’ll find wireless charging points all over the place, from cafés and restaurants to airports and there are now a wide selection of consumer-friendly options for your office desk or use at home.
Check out the
best wireless chargers if you want to pick one up for yourself.
The appeal of wireless charging comes from the ability to simply set your phone down on the pad and have it immediately start charging back up – no searching for the right cable or a USB socket.
Despite the feature’s absence on the Pixel 2 and 2 XL, however, it is possible to introduce it using aftermarket solutions.
A new generation of Pixel phone is coming. Check out our coverage of the Google Pixel 9 and Google Pixel 9 Pro Fold, which we expect to arrive in August 2024 running all-new Android 15, potentially alongside a new Pixel Watch 3. (Do keep your eyes peeled for deals on other Pixel devices in the meantime!).
Add wireless charging to the Pixel 2 and XL
You need two inexpensive accessories to add wireless charging to the Google Pixel 2 and XL.
First, you need a Type C Wireless Charging Receiver. We used the Nillkin Magic Tag USB C Qi Wireless Charger Receiver Chip (Short Version).
It costs
£10.99 from Amazon UK or
$12.99 from Amazon.com.

Compatible with any Qi wireless charger (Qi is one of the most common wireless charging standards), the Nillkin Magic Tag doesn’t cover the fingerprint sensor of small-size phones like the Google Pixel 2. It’s also ultra-slim at only 0.16cm and adds minimal bulk to your phone.
Secondly, you need a slim case for your phone, if you don’t already own one. You can actually do without the case and just stick the charging receiver directly to the back of your Pixel but we recommend a case to protect both charger and phone.
We opted for the Spigen thin-fit case for Pixel 2. It costs
£9.99 from Amazon UK or
$11.99 from Amazon.com. It has a QNMP compatible slot, which will allow for the receiver, but you can use any thin case if you prefer, as the receiver is so thin. For the Pixel 2 XL it’s available from Amazon UK and Amazon US.
Another case we tested was the Spigen Google Pixel 2 Case Rugged Armor Pixel 2 Case Cover. It costs
£9.99 from Amazon UK or
$12.99 from Amazon.com. It lacks the QNMP slot but worked just fine for us. You can get the same for the Pixel 2 XL:
£9.99 from Amazon UK and
$10.99 from Amazon US.
See our round-up of the
best Pixel 2 and 2 XL cases if neither of the previous cases we mentioned float your boat.

Place the receiver inside the case (above shows the Spigen thin-fit case for Pixel 2 with its slot but most thin cases will do), and connect the USB-C connector to the Pixel 2’s port. Then put the phone in the case. Now your Pixel 2 should be ready for wireless charging.
Some wireless chargers can be fiddly to place your phone on correctly and one of the best we tested to help avoid this issue was the Anker Qi-Certified PowerPort Wireless 5 Stand Wireless Charger (
£19.99 or
$16.99 in the US). Some other charger stands were a bit fussy about where the phone sat, but not this one.

This charges your phone wirelessly and also works as a stand so that it’s easily glanceable on your desktop. Just pop your Pixel on and it will start to charge back up to full power.